Question by Student 201527136 Professor, I have question about fully-developed flow in pipe. You said the equation $\frac{U}{U{_{b}}}=2\left ( 1-\frac{r^{2}}{R^{2}} \right )$. Is this expression valid for both laminar flow and turbulent flow?
 Question by Student 201428239 Professor, I have a question about A7 of Q5. In this question, I need to use correlation of free convection H-T. I should use vertical plane correlation. In the table, a comment written as "x the distance from the bottom". In this comment, the x means height?? Then, when I use correlation ( $Nu_x = C(Gr_xPr)^m$, should I use x = H??
In this correlation, $x$ is the distance from where the boundary layer starts.
 Question by Student 201428239 Professor, I have a question about A6 of Q3. In this question, I know the value of q local and q average.Then, I can get the relation between $Nu_x and Nu_L$ average. To solve (a), Do I need to compare these values and find the flow type??? If so, I can easily get Laminar flow, but in your comments, it could be either laminar or lam-Turb mix. How can find Lam-Turb mix relation??? Thank you
 Question by Jaehyuk Professor, I have a question regarding A7Q5. As far as I believe, it is suitable to use the correlation for a vertical plane with constant heat flux;$Nu_x = C(Gr^*_{x}Pr_{f})^m$. Here starts my problem. In order to find constants(C and m), the range of $Gr_x^*$ has to be set first. However, when $Gr_x^*$ is in between $1E11  06.18.19 If you can't find a correlation that fit perfectly your situation, then choose the one that is the closest.  Question by Student 201428239 Professor, I have a question about A7 of Q5. In this problem, I should find free convection heat transfer coefficient. But in correlation, I should know$T_s$first. I can get$T_s$through iteration process. And then get h. Is this procedure correct?? Because in the problem, the order is to find h first and then find$T_s$. Yes, exactly. I mentioned this in class.  Previous 1 ... 38 , 39 , 40 • PDF 1✕1 2✕1 2✕2 • New Question $\pi\$