Fundamentals of Fluid Mechanics Questions and Answers  
Question by AME536A Student
In class on Tuesday, you said we could separate the terms for the mass conservation equation for each of the fluids in our control volume (water and air). Can we also write a mass conservation equation for every fluid in our flow - so we would have one mass conservation equation for water in our control volume, and one mass conservation equation for air in our control volume? If we combine the two equations, it seems like we would have issues with dimensional homogeneity, as some terms would be [kg/s of air] and others would be [kg/s of water].
10.21.20
Yes, you can locate the control volume anywhere you want unless specified otherwise in the question.
Question by AME536A Student
Just to make sure I understand you correctly, we can draw a control volume around a region that contains both air and water, and then write two separate mass conservation equations to describe the system. One mass conservation equation would be with respect to the air, and the other with respect to the water. Please confirm.
No, one control volume will give you one mass conservation equation only.
Question by AME536A Student
I am confused about how said one mass conservation equation would be dimensionally homogeneous? If there was only one equation, some of the terms would have units [kg/s of air] and others would be [kg/s of water]. Please explain, thanks!
Your units make no sense. In the mass conservation equation, the only units are kg/s. The mass conservation equation simply states that mass is conserved and does not distinguish between the type of matter. Thus, it can be applied in the form shown in the tables to a situation where hydrogen and oxygen enter a control volume, where they react with each other forming water vapor in the process, and only water vapor exits the domain. Mass is conserved: thus the amount of mass coming out will be equal to the amount of mass going in. It doesn't matter what the species are or whether the phase is liquid or gas.
Question by AME536A Student
P3Q3.PNG

Take tank 1 for example at the instant the fluid starts flowing.
$\frac{d}{dt}\int{\rho dV} +\int {\rho (\vec{v} \cdot \vec{n})dS}=0$
We then separate into 4 terms as follows:
$\frac{d}{dt}\int{\rho_w dV_w} +\frac{d}{dt}\int{\rho_{Air} dV_{Air}} +\int {\rho_w (\vec{v} \cdot \vec{n})dS_w}+\int {\rho_{Air} (\vec{v} \cdot \vec{n})dS_{Air}}=0$
or simplified
$\frac{d}{dt}\int{\rho_w dV_w} +\frac{d}{dt}\int{\rho_{Air} dV_{Air}} +\dot{m}_{12} -\dot{m}_{Air1}=0$
We know the only mass that can contribute to the volume expansion of air is the mass of air flowing in. Similarly, the only mass that can contribute to the volume reduction of water is the mass of water leaving. Why can we not separate this into two equations such that:
$\frac{d}{dt}\int{\rho_w dV_w} +\dot{m}_{12}=0$
and
$\frac{d}{dt}\int{\rho_{Air} dV_{Air}} -\dot{m}_{Air1}=0$
?
The last 2 equations can not be deduced from the single mass conservation equation you showed previously. To obtain separate mass conservation equations, you need to apply the mass conservation equation in CV form on each fluid.
Question by AME536A Student
I am still struggling to solve the tank problem in the assignment 3. The water can be considered incompressible fluid. When I choose the control volume enclosing the entire portion of tank 1, it is obvious that the density of air in the tank 1 changes in time.(i.e. both the density and volume are changed in tank 1) However, can I consider the density of water as constant because it is incompressible fluid? (i.e. the volume of water in the tank 1 is the only property that changes in tank 1.)
No, the density of the air doesn't change in time or space in this problem.
Previous   1  ...  13 ,  14 ,  15  ...  39    Next  •  PDF 1✕1 2✕1 2✕2
$\pi$