| Fundamentals of Fluid Mechanics Questions and Answers | |
|
|
|||||||||
|
|
|||||||||||
|
The problem is this: your control volume encloses all the volume inside the tank. Thus, inside the control volume, there is both air and water. In your solution you mention that the integral $\int_V \rho dV$ becomes $\rho_{\rm A} V_{\rm A}$. This is not correct here because the density in the volume is not constant and equal to $\rho_{\rm A}$ but varies because there is also water within the volume with a density $\rho_{\rm W}$.
|
|
||
|
|
|||||||||||
|
Then, in this case, you can assume constant density within the blue volume at one given time. But, this won't fix all the problems because now you have a moving boundary on the bottom of the blue domain. So you need to use a different form that is applicable to a moving surface (with $\vec{v}_{\rm CV}$ taken into account). If you can't find this form in the tables, you need to derive it using the Reynolds transport theorem.
|
|
||
|
|
||||||||
|
You are missing the point. You are using (and have to use) the CV form of the equations to solve the problem, not another approach. If you locate the CV around the air for part (b) as you did, you must introduce the velocity of the moving surface within your solution, by deriving an energy equation in integral form using the Reynolds transport theorem and the energy equation in differential form. The velocity of the moving surface should cancel out in the end as you point out, but this needs to be proven within the context of the control volume equations applicable to a domain with a moving boundary. Otherwise, your logic is incorrect even if you arrive at the right answer.
|
|
||
|
|
||||||||
|
This sounds more or less correct. But what units does the angular velocity of the blade have? Radians per second?
|
|
||
| $\pi$ |