Fundamentals of Fluid Mechanics Questions and Answers  
Question by AME536A Student
Hello Dr. Parent. I realize this is coming at the 11th hour, but would you please exclude Homework #6, Problem #2 and Problem #3 Part (b) from potentially being on the final? After trying to rework back through both problems and timing myself, Problem #2 took approximately 50 minutes with all the algebraic manipulation involved and Problem #3 Part (a) itself took approximately 40 minutes to successfully and completely answer (i.e. with all CV's clearly drawn, all major assumptions clearly written out and applied, and correcting my work when I reviewed and found a slight mistake in my final answer) before even beginning Part (b). I realize that this may just be a problem with my process speed and that you replied in an earlier post that some component of Homework #6 will be potential fair game regardless, but given that Problem #2 is a proof, Problem #3 Part (a) alone fully tests our ability to apply and manipulate the energy conservation equation, and Problem #4 (in parts or as a whole) doesn't seem to take nearly as long as Problem #1 while testing similar equation manipulation skills, I figured I would ask. I realize this may not be possible this close to the final if the test is already set, but please let us know what you think and we can proceed accordingly. Thank you.
12.14.20
I can exclude A6Q2. If I ask A6Q3, I'll ask you either part (a) or (b), not both.
Question by AME536A Student
Control volumn.PNG
The attachment Control volumn.PNG is no longer availableI have a question about prob #3 in the assignment 3. You said that the both density of water and air are everywhere the same and does not change in time. The equation for Tank 1 and Tank 2 is as follows.
Tank 1: $\frac{d}{dt}\int_{Vtank1,w} \rho_w dVtank1,w$ + $\frac{d}{dt}\int_{Vtank1,a} \rho_a dVtank1,a$ - $\dot{m}_{air1}$ + $\dot{m}_{12}$ = 0
Tank 2: $\frac{d}{dt}\int_{Vtank2,w} \rho_w dVtank2,w$ + $\frac{d}{dt}\int_{Vtank2,a} \rho_a dVtank2,a$ - $\dot{m}_{air2}$ - $\dot{m}_{12}$ - $\dot{m}_{Win}$ + $\dot{m}_{Wout}$= 0
I tried to isolate $\dot{m}_{12}$ in the equation of tank 1, and then I substitute tank 1 equation into tank 2. And then, I got as follows.
$\rho_w \frac{d}{dt}\int_{Vtank1,w}dVtank1,w$ + $\rho_a \frac{d}{dt}\int_{Vtank1,a} dVtank1,a$ + $\rho_w \frac{d}{dt}\int_{Vtank2,w} dVtank2,w$ + $\rho_a\frac{d}{dt}\int_{Vtank2,a} dVtank2,a$ -$\dot{m}_{air2}$ -$\dot{m}_{air1}$- $\dot{m}_{Win}$ + $\dot{m}_{Wout}$= 0
$\frac{d}{dt}\int_{Vtank2,w} dVtank2,w$= 0.005m3/s = - $\frac{d}{dt}\int_{Vtank2,a} dVtank2,a$
I think that in order for me to get $\dot{m}_{Wout}$, I need the relationship between $\frac{d}{dt}\int_{Vtank1,w}dVtank1,w$ and $\frac{d}{dt}\int_{Vtank1,a} dVtank1,a$
How can I obtain the relationship? I will attach my control volumn.
This is too hard to read and is giving me a headache. Please put long equations on their own line using the \$\$ environment instead of the \$ environment. Also, I can't read $dVtank1$ and the like. This is not properly typeset. Use subscripts and superscripts as needed.
Question by AME536A Student
Control volumn.PNG
I apologize for this. I have a question about prob #3 in the assignment 3. You said that the both density of water and air are everywhere the same and does not change in time. The equation for Tank 1 and Tank 2 is as follows.
Tank 1: $$ \rho_{w}\frac{d}{dt}\int_{V_{tank1,w}}dV_{tank1,w}+\rho_{a}\frac{d}{dt}\int_{V_{tank1,a}}dV_{tank1,a}-\dot{m}_{air1}+\dot{m}_{12}=0$$
Tank 2: $$ \rho_{w}\frac{d}{dt}\int_{V_{tank2,w}}dV_{tank2,w}+\rho_{a}\frac{d}{dt}\int_{V_{tank2,a}}dV_{tank2,a}-\dot{m}_{air2}-\dot{m}_{12}-\dot{m}_{Win}+\dot{m}_{Wout}=0$$
I tried to isolate $\dot{m}_{12}$ in the equation of tank 1, and then I substitute $\dot{m}_{12}$ into tank 2. And then, I got as follows.
$$\rho_{w}\frac{d}{dt}\int_{V_{tank1,w}}dV_{tank1,w}+\rho_{a}\frac{d}{dt}\int_{V_{tank1,a}}dV_{tank1,a}+\rho_{w}\frac{d}{dt}\int_{V_{tank2,w}}dV_{tank2,w}+\rho_{a}\frac{d}{dt}\int_{V_{tank2,a}}dV_{tank2,a}-\dot{m}_{air1}-\dot{m}_{air2}-\dot{m}_{Win}+\dot{m}_{Wout}=0$$
$$ \frac{d}{dt}\int_{V_{tank2,w}}dV_{tank2,w}=0.005m3/s=-\frac{d}{dt}\int_{V_{tank2,a}}dV_{tank2,a}$$
I think that in order for me to get $\dot{m}_{Wout}$, I need the relationship between $\frac{d}{dt}\int_{V_{tank1,w}}dV_{tank1,w}$ and $\frac{d}{dt}\int_{V_{tank1,a}}dV_{tank1,a}$
How can I obtain the relationship? I will attach my control volumn.
You need another equation that fixes the volume of each tank (sum of air volume and water volume) to a constant in time.
Question by AME536A Student
I got another equation through the relationship of $$\frac{d}{dt}\int_{V_{tank1,w}}dV_{tank1,w}=-\frac{d}{dt}\int_{V_{tank1,a}}dV_{tank1,a}$$
But, when the above relationship is applied to the equation combining the tank 1 equation with tank 2 equation, I have two unknown parameters
(either $$ \frac{d}{dt}\int_{V_{tank1,w}}dV_{tank1,w}$$ or $$\frac{d}{dt}\int_{V_{tank1,a}}dV_{tank1,a}$$, $\dot{m}_{W_{out}}$).
How can I find $ \frac{d}{dt}\int_{V_{tank1,w}}dV_{tank1,w}$?
You need another control volume around the air ducts linking tank 1 and tank 2.
Question by AME536A Student
I have a question about prob #3 in the assignment 6. Are the both density of water and air everywhere the same and does not change in time, too?
In A6Q3, you can take the density of water as constant, but the density of the air is not.
Previous   1  ...  25 ,  26 ,  27  ...  39    Next  •  PDF 1✕1 2✕1 2✕2
$\pi$