Fundamentals of Fluid Mechanics Questions and Answers  
Question by AME536A Student
I have been working on problem 2 from assignment 4 for a long time and am wondering if there is some mistake in my logic that you can help me with. To solve the problem I have taken the control volume form of the conservation of mass equation in both the x and y direction. For the y direction I found the following equation: $$\int_{S1} \rho v_{y1} (vec(v) \dot\ vec(n_1)) dS_1 + \int_{S2} \rho v_{y2} (vec(v) \dot\ vec(n_2)) dS_2 = -\int_{S2} P_2 n_y dS_2 - Fcos(\phi) $$ Where $\phi$ is the angle of F from vertical (y). This simplified to $$\rho v_{y2} q_2 A_2 = -P_2A_2 - Fcos(\phi)$$ Next, I found the momentum equation in the x-direction which became: $$\int_{S1} \rho v_{x1} (vec(v) \dot\ vec(n_1)) dS_1 + \int_{S2} \rho v_{x2} (vec(v) \dot\ vec(n_2)) dS_2 = -\int_{S1} P_1 n_x dS_1 -\int_{S2} P_2 n_x dS_2 + Fsin(\phi) $$ which simplified to: $$\rho v_{x2} q_2 A_2 - \rho v_{x1} q_1 A_1 = P_1A_1 - P_2A_2 + Fsin(\phi)$$ This left me with 2 unknowns (F and $\phi$) and 2 equations after I solved for $v_{x1}$ $v_{x2}$ and $v_{y2}$ using conservation of mass. But my answer was not quite correct. Are there any major issues in my logic somewhere? Thank you for your time!
09.28.21
I have difficulty understanding some of your equations. Please typeset equations better using my mini HOWTO document. Use $\vec{v}$ instead of $vec(v)$. Instead of carrying $F$ and $\phi$, why not simply solve for $F_x$ and $F_y$? This will simplify things a little. I guess you mean conservation of momentum instead of conservation of mass? If so, I see a problem with your integrals. There is a pressure force acting everywhere on the object not just at station 1 and 2.
Question by AME536A Student
Dr. Parent, thanks for your answer. I'm a little confused though because in your example problem (water jet) you did not include the $P_{atm}$ value. In my notes, I wrote that you did not include it because it was constant everywhere but the entrance/exit points of the fluid, it looked to me like the same logic applied to this problem, is this not correct?
09.29.21
The situation was different for the water jet interacting with a plate. In that case, the pressure was equal to atmospheric pressure everywhere $n_{\rm N}$ was not zero. It's not the case here, and you need to factor in the atmospheric pressure force.
Question by AME536A Student
Is there a straightforward way to compute the integral of $x$ and $y-component$ of the surface normal vector over the elbow surface in A4Q2?
Where you are not given the geometry fully, you need to find a way to avoid computing the integral in that region.
09.30.21
Question by AME536A Student
Would it be a fair assumption to say that the pressure at stations 2 and 3 is equal to atmospheric pressure in A5Q2?
10.02.21
To do so, extend a bit the jets so that they are far enough from the plate. Then, you can make the argument that the jet pressure at 2 and 3 is equal more or less to atmospheric pressure.
Question by AME536A Student
Dr. Parent, for A5Q4, can we assume that the problem is 2D and that the height of the snow plow is negligible?
10.03.21
No, absolutely not. This is a 3D problem, and it's the three-dimensionality of the problem that makes this particularly hard to solve. If you assume 2D, you'll be missing the point of this question. Why would you want to assume the height of the plow is negligible?
Previous   1  ...  28 ,  29 ,  30  ...  39    Next  •  PDF 1✕1 2✕1 2✕2
$\pi$