Fundamentals of Fluid Mechanics Questions and Answers  
Question by AME536A Student
Maybe the issue is how I am setting up my control volumes. If we draw them around tanks A and B then dV/dt=0 because the volume of each tank is constant (even though its contents are not). Starting with
$\frac{d}{dt}\int{\rho dV}+\int{\rho (\vec{v} \cdot \vec{n}) dS}=0$
I am confused on how to solve because without the initial condition of the system (volume of each tank, and the mass of each fluid it contains), we cannot determine $\frac{d\rho}{dt}$ and are stuck using a flow balance:
$Rate_{in} - Rate_{out} = Accumulation$
where
Accumulation=0
This method works because our volumes are constant and our fluids are incompressible (since density is given as a constant). Can you please help clarify where I'm making my mistake in the mass conservation equation?
10.08.20
Yes but you can derive some expressions such as $dm/dt$ of water or air within each tank starting from the CV equations. Also, accumulation is not zero: this is not a steady-state problem.
Question by AME536A Student
The homework 2 #3.png
I am solving the prob #3 in the assignment 2 using the integral of force distribution along the surface of the plate. My balance equation is as follows: $$ \int_{S=0}^\frac{h}{sin35}\rho g \left(h-S sin35\right)S\left(1m\right)dS =\int_{S=0}^L mgcos35 dS $$ I got the correct answer indicated in the assignment file by using the above equation. I have two questions. 1) As I know, the hydrostatic pressure applied on the horizontal surface at the same depth is the same. Can 1m be selected as the width of plate instead of designating a variable? 2) The logic used on the right hand side is the summation of all the moments developed by the mgcos35 along the length of plate. Can I use the above logic to get the force distribution developed by a mass on the right hand side? I am attaching a image.
Why do you draw $\alpha$ but write $\cos(35^\circ)$? This is difficult to understand. Do you mean $\cos(\alpha)$ with $\alpha=35^\circ$? It's better to keep the depth as a variable if the depth is not known. Choosing 1m is arbitrary. Also, I don't understand what you mean by “The logic used on the right hand side is the summation of all the moments developed by the mgcos35”. Explain this better. Also, ask one question per post only.
Question by AME536A Student
I am sorry about that. I will upload a question per post. Yes. $\alpha$ is 35 degree indicated in the assignment file. For the second question, I miss S, representing the distant from the hinge, on the right hand side, so my equation will be as follows. $$ \int_{S=0}^\frac{h}{sin\alpha} \rho g \left(h-Ssin\alpha \right)SD dS=\int_{S=0}^L \left(mgcos\alpha\right) SDdS $$ I replace 35 degree with $\alpha$ to make you understand better and define D as a variable of the depth. Thus, my equation means that the moment of plate developed by hydrostatic pressure is equal to that developed by the normal force of a mass. I was wondering if my equation is correct.
10.09.20
Yes this seems fine, but you're missing on the contribution from atmospheric pressure. If it cancels out, this should be shown.
Question by AME536A Student
For the prob #3 in the assignment 5, is that answer correct?
10.10.20
Yes the answers are correct. You should be able to get the same answer within 1% or less error.
Question by AME536A Student
Do we have enough conditions given in HW5 problem #2 to solve it? There have 1 continuity eq, 1 momentum eq (in one direction), 2 Bernoulli eqs. But the unknowns are the area at station 1, area/pressure/velocity at station 2 and 3. With 4 equations and 7 unknowns, am I missing any assumptions or relations here?
If you don't have enough equations for the number of unknowns, first try to solve the problem and it sometimes occurs that one unknown will cancel out and not affect the solution of the other unknowns. If this strategy doesn't work, you need to make assumptions so that the problem becomes solvable.
Previous   1  ...  8 ,  9 ,  10  ...  39    Next  •  PDF 1✕1 2✕1 2✕2
$\pi$